Design |
||||
1. Design Code |
TIA/EIA-222-G/F |
|||
Structure Steel |
||||
2. Grade |
Mild Steel |
High Tensile Steel |
||
GB/T 700:Q235B, Q235C,Q235D |
GB/T1591:Q345B, Q345C,Q3455D |
|||
ASTM A36 |
ASTM A572 Gr50 |
|||
EN10025: S235JR, S235J0,S235J2 |
EN10025: S355JR, S355J0,S355J |
|||
3. Design Wind Speed |
Up to 250 km/h |
|||
4. Allowable deflection |
0.5 ~1.0 degree @ operational speed |
|||
5. Tension strength (Mpa) |
360~510 |
470~630 |
||
6. Yield strength (t≤16mm) (Mpa) |
355 |
235 |
||
7. Elongation (%) |
20 |
24 |
||
8. Impact strength KV (J) |
27(20°C)---Q235B(S235JR) |
27(20°C)---Q345B(S355JR) |
||
27(0°C)---Q235C(S235J0) |
27(0°C)---Q345C(S355J0) |
|||
27(-20°C)---Q235D(S235J2) |
27(-20°C)---Q345D(S355J2 |
|||
Bolts & Nuts |
||||
9. Grade |
Grade 4.8, 6.8, 8.8 |
|||
10. Standards for mechanical properties |
||||
10.1 Bolts |
ISO 898-1 |
|||
10.2 Nuts |
ISO 898-2 |
|||
10.3 Washers |
ISO 6507-1 |
|||
11. Standards for Dimensions |
||||
11.1 Bolts |
DIN7990, DIN931, DIN933 |
|||
11.2 Nuts |
ISO4032, ISO4034 |
|||
11.3 Washers |
DIN7989, DIN127B, ISO7091 |
|||
Welding |
||||
12. Method |
CO2 Shielded Arc Welding & Submerged Arc Welding(SAW) |
|||
13. Standard |
AWS D1.1 |
|||
Marking |
||||
14. Method of marking of the members |
Hydraulic Press Stamping |
|||
Galvanizing |
||||
15. Galvanization standard of steel sections |
ISO 1461 or ASTM A123 |
|||
16. Galvanization standard of bolts and nuts |
ISO 1461 or ASTM A153 |
|||
Test |
||||
17. Factory test |
Tensile test,Elements analysis, Sharpy test(impact test), Cold Bending, Preece test,Hammer test |
|||
Galvanized pylon angle Steel tower for Electrical High voltage transmission Tower
Hot dip galvanized steel Tapered electrical Pole power transmission tower Anti-typhoon Steel Pole
4 legs 10-150m Galvanized Angle Steel 5G Mobile Communication Lattice Self-support Tower
11m Hot-Dip Galvanized ASTM A123 High-Strength Steel Utility Pole for Electric Power Distribution Overhead Line
EN